Missing Zones/Caddx NX-8e
I have a Caddx NX-8e with two 216 expander cards. One 216 is fully
populated with no issues. The other card has half of the zones
populated with the remaining zones jumpered with a resistor.

I added a zone tonight. The zone was working fine; it is 33. After a
little while, 33 and 34 are missing when I look at the zone status on
the keypad. Zone 33 is connected to the device; EOL resistor at the
device. 34 is jumpered with an EOL resistor.

No matter what I do, I cannot get 33 and 34 to sh ..
Read more...