Two Driveway Patrols
I have a Driveway Patrol system and it has been working great.
Recently my neighbor got one too after seeing how well mine works. Now
we both get alerted whenever someone goes past either of our sensors.
I'm guessing that the manufacturer never expected to sell very many of
these and have two people close to each other using the product :)

Is there some way to change the frequency, Kenneth?

Rod
Read more...

Suggestions for (Low) Temperature and Water alarms
We have a DMP XR200L based wired alarm system consisting currently of
smokes, door/window sensors, and motion sensors.

I would like to add a water sensor in the basement and at least one
temperature sensor.

I would like the temperature sensor to be small and unobtrusive yet
adjustable if possible.

Any suggestions on brands and models to consider that would be
compatible and consistent with my alarm system.

Thanks
Read more...

Trap door or rising cage party store or bank security system
Another of my ideas, anyone know if this has been tried before:

A chamber is built underground in front of the bank teller or party
store checkout area.
Someone pulls a gun demanding money, clerk pushes a button and the
floor opens up
under the robber and he/she falls into a holding cell while bullet
proof glass slides over the
opening holding the person secure until police arrive.

or

Bullet proof glass rises from the floor (very quickly) at the push of a
button enclosing the would be robber ..
Read more...

NFPA 72 test
I operate a small family run alarm service company. We install and
service burglar alarms and related equipment, but up till now have only
"serviced" existing fire alarm equipment. We have worked on many
different types and are familiar with most electrical configuratuions.
We also service and are known by many area police and fire departments
and our company is well respected. Recently a good commercial customer
asked us to install door holders on existing fire alarm systems in 10
of ..
Read more...

Learning Resources
I have been reading this group for a little while now and am still
confused about what options are best for me. I'm looking to install
some kind of security system to protect my family. The house I live in
is about 30 years old and is a split, so running wire isn't too bad. I
have experience with running network cable but not to doors or windows,
of course. Are there some online resources someone can recommend so I
can educate myself about the options available? Being a technical gu ..
Read more...

Just a sampling
Many here, especially the various aliases of Olson, seem to enjoy visiting my
sites. As a public service I thought I'd share my pages here so that you won't
have to waste time browsing my sites directly.

There are a few problems with the method used so far. I'll work on that so that
upcoming posts will not have broken links. Your patience while I work out the
details will be appreciated.

Regards,
Robert

--

Regards,
Robert L Bass

Bass Burglar Alarms
The Online DIY Store
http://www.Bass ..
Read more...

Minimum feature set for MLFR?
I need to support Multi-link frame relay. Do I need more than IP Plus?
Read more...

PIX 501 - VPN connection question
My company is using two PIX 501 and establish the VPN connection
between two office. Now one of office is changed to use the other ISP
and of course the fixed IP is changed also. Would anyone tell me how
can I change the configuration to make the VPN connection work?

Thanks a lot.
Read more...

ROM Monitor Can Not Recover From Exception A Board Reset Is Issued
I am having Cisco 6000 series switch .I am getting this Error Message
on Console:

PC = 0xbfc034cc. Cause = 0x4000, Stastus Reg = 0x3041c003
ROM Monitor Can Not Recover From Exception
A Board Reset Is Issued
Read more...

Skype-out half duplex problem
Setup: 2.4Ghz, 1GB RAM, Win XP, Linksys router, Linksys CIT200 phone, cable internet. I'v noticed that skype-out calls appear to be half-duplex. I.e. If the other person is talking and I start talking as well, the other persons sound stops. Other than that there are practically no problems, great ..
Read more...

Adding custom options to DHCP scope
I need to add custom options to a predefined DHCP scope for our Mitel phones on Windows 2003 server. I've done this once before but misplaced my notes during our move. I can go into DHCP scope options and see and edit all the options but even in advanced there is no andquot;add newandquot;. Can some ..
Read more...

Skype to New Zealand
I have been trying to talk to my daughter in New Zealand using video Skype beta 2.0.0.63, under Win XP Home. I am on broadband in the UK, but unfortunately she is still on 56 kbps dialup. The connection starts off well -- excellent picture and acceptable audio -- but after a few seconds the audi ..
Read more...

DSL VoIP Advise - Southwestern Ontario Users
Good day... I'm looking for current DSL VoIP customers who are located in southwestern Ontario to share their experiences relative to: 1. Are you totally satisfied with voice quality (clarity, delay, etc.)? 2. Who are your DSL VoIP service providers and what is your system uptime (i.e. andgt;99percent)? 3 ..
Read more...

which auto dialer to use in voip
I am trying to set up a autodialer using a Zoom voice modem from my work station to make calls to my voip deployments at remote locations.Can someone suggest a good auto dialer to buy.Also my remote location is having an answering machine there.Is there anyway that when i make a call,the answering m ..
Read more...

Information on Cisco Telephony Solutions
Can anyone advise some good information on Cisco telephony solutions? My company is looking into a new phone system. We have done some homework on the NBX line from 3Com and would like to also consider Cisco. Thank you in advance, Jonathan
Read more...

Simple static Jitter buffer dimensioning
Hi all, how can I choose the size (in frames or packets, provided they are always of the same size) of a simple static jitter buffer implemented as a ring buffer that can overflow or underflow (so, no menagement of timestamps) if I know the variance of the interarrival times? The interarrival are ve ..
Read more...

phone adapter, please help!
let's say that i've a voip account: which one do u think is the best phone adapter? Thanks, Robert
Read more...

Latest voip phone/usb phone/voip gateway
Our online store provide VoIP terminal from China USB Phone:AU-100 AU-200 USB Gateway:AU-600 IP Phone:AT-320PD AT-320EE AT-320ED VoIP Gateway:AG-168V AG-268 AG-468 the prices are very suitable for personal usage. please visit our sales web http: www.skype-link.com
Read more...

Small Multi-Site Voice Network
Greetings All, We have at present, three office sites with on average, 10 people at each location. Two of these locations are within a few miles of each other, the third is separated from the first two by a distance of 800 miles or so. We also have a few teleworkers scattered about. We have a ha ..
Read more...

Vonage/POTS and Venture 3-line Phone
I'm hoping to use two Vonage VOIP lines and a single POTS line. Our phone system includes threel Nortel Venture 3-line phones. The Vonage comes from a single Linksys PAP2 adapter. I understand the danger of connecting an incoming POTS line to the Linksys PAP2 adapter. I know how to disconnect the ..
Read more...

SIP querries
hi , i am learning SIP stack developemnt in a company as induction training can any one suggest me answers to below questions 1. how come u know that which transport protocol is used (TCP UDP SCTP)from the SIP stack 2. where HASHING technique is used in a SIP Stack and how. 3. What is SAP (ser ..
Read more...

Files on a C3560?
Hello,

on a Catalyst C3560G-24TS I see that there is a subdirectory on the flash that
contains the system image, a file called "info" and a subdirectory with a bunch
of HTML. Now if I want to upgrade the software:
- do I have to build a similar tree?
- may I remove the current tree?
- what is this structure for?

Regards,
Christoph Gartmann

--
Max-Planck-Institut fuer Phone : +49-761-5108-464 Fax: -452
Immunbiologie
Postfach 1169 Internet: gartmann@imm ..
Read more...

Cisco (routers) for Beginners
I have two offices. I want to setup a VPN between them. I know
absolutely nothing about Cisco or routers. Today I purchased a Cisco
871 router for my office that has a T1 and I purchased a Netopia 3347
router for my office that has DSL. They should both be here on Monday
3/6/2006. Where can I find a good crash course for beginners on
routers? Also where can I find a good crash course on Cisco router
configuration? If you have any suggestions including websites, PDF
files or books, please ..
Read more...

What kind of Media Gateway
Hey,

I'm new to this VoIP business.
For a evaluation implementation of a VoIP system I need your help
finding the 'best' media gateway in trunking mode (no matter if it's
software or hardware).
We got a couple of EURO ISDN (BRI) channels that goes up to one PRI in
future on the PSTN side. On the VoIP side we got serveral users talking
SIP (maybe IAX2 in future) with the need of using SRTP and MIKEY.
What MediaGateway, MediaGatewayController, PBX (maybe Asterisk),
Configuration, from wh ..
Read more...

Discover Wireless Alarm System.. >
My wireless alarm system was "deaf" and "dead" during the use of an
FCC like authorized low range and power wireless radio "headphone",
that simple...

Unfortunately this authority authorized and certified device
transmitted on the shared and not protected wireless alarm system
frequency, a lot of "other" low power transmitters have the same bad
effect.
: It muzzle any possible incoming signals from the sensors.


This problem is well known in telecommuni ..
Read more...

VoIP implementaion code
hi there,

can any one help me to implement SIP protocol of VoIP using either
C(linex platform) or Java

its urgent...
Read more...

***WTB/WTS USED CISCO VOIP GATEWAYS & NETWORK HARDWARE
We buy and sell / new and used ADTRAN, CAC, CISCO, QUINTUM, ADC, PACKETEER,
NORTEL, EXCEL/LUCENT, USR/UT-STARCOM, TELABS, JUNIPER, EXTREME, FOUNDRY,
the list goes on. Please check us out on the web at www.wrca.net.

CURRENTLY LOOKING TO BUY:
Used Cisco Gateways andamp; Modules

AS53-96-CH (Chassis, AC/DC, 128DRAM, 4T1, 96 Mica) AS53-120-CH (Chassis,
AC/DC, 128DRAM, 4T1, 120 Mica) AS53-192-CH (Chassis, AC/DC, 128DRAM, 4T1,
192 Mica) AS53-240-CH (Chassis, AC/DC, 128DRAM, 8T1, 240 Mica)) AS53-48-CC
( ..
Read more...

High latency connection - sugestions 4 VoIP service(s)/settings??
Hi All,

I'm using a wireless CDMA450 connection, with latency around 500 ms.
Stable bandwith is limited to 153 Kbps

Given this conditions,:
1) which services could possibly be better for me, and
2) could any custom settings on the softphone improve my calls?

TIA,
jbr
Read more...

Vonage/POTS and Venture 3-line Phone
I'm hoping to use two Vonage VOIP lines and a single POTS line. Our
phone system includes threel Nortel Venture 3-line phones. The Vonage
comes from a single Linksys PAP2 adapter.

I understand the danger of connecting an incoming POTS line to the
Linksys PAP2 adapter. I know how to disconnect the POTS line from the
Vonage lines in our home. I've also read of people successfully
connecting both a POTS and a Vonage line to a two-line phone.

But I'm really concerned about the Venture phone. Th ..
Read more...

Discover Wireless Alarm System.. >
My wireless alarm system was "deaf" and "dead" during the use of an
FCC like authorized low range and power wireless radio "headphone",
that simple...

Unfortunately this authority authorized and certified device
transmitted on the shared and not protected wireless alarm system
frequency, a lot of "other" low power transmitters have the same bad
effect.
: It muzzle any possible incoming signals from the sensors.


This problem is well known in telecommuni ..
Read more...

DIY Home Video Surveillance
Hi everyone,

I want to build a home video surveillance system that has the following
requirements:

- 2 video cameras - color during the day and infrared at night for
night time surveillance
- Preferably wireless if i can get it working as good as "wired"
- I want to use my home PC as a way to record the live video feeds and
archive them to DVD (I have a powerful P4 with almost a terabyte of HD
space)

Now my question is, how do I set this up? What wireless cams do you
recommend? What ..
Read more...

Missing Zones/Caddx NX-8e
I have a Caddx NX-8e with two 216 expander cards. One 216 is fully
populated with no issues. The other card has half of the zones
populated with the remaining zones jumpered with a resistor.

I added a zone tonight. The zone was working fine; it is 33. After a
little while, 33 and 34 are missing when I look at the zone status on
the keypad. Zone 33 is connected to the device; EOL resistor at the
device. 34 is jumpered with an EOL resistor.

No matter what I do, I cannot get 33 and 34 to sh ..
Read more...

Class D SM
Guys, is there a Subnet Mask for Class D, amd E?
Read more...

Etherchannel between 3550 EMI & 2900XL
is it possible to setup etherchannel or port-channel between 3550 EMI
and 2900XL? im having problems getting it to work.

2912XL

interface FastEthernet0/1
port group 1

interface FastEthernet0/2
port group 1

3550 EMI

interface FastEthernet0/1
channel-group 1

interface FastEthernet0/2
channel-group 1

Basically i want to do trunking as well as provide redundancy as 1
combine port.

thanks.
Read more...

Customizing Cisco VPN client installation?
I've looked through all the documentation and of all the things the
Cisco VPN Client 3.x installation allows you do to with customizing
the vpnclient.ini & oem.ini files, it doesn't have anything that lets
you drop a shortcut icon on the user's desktop.

Is there a way, during a silent install, to drop the a particular
profile's shortcut on the Windows desktop? Would I have to
deconstruct Installshield to make this happen?

-Bob
Read more...

SSL Email SLOW sending through PIX
Hey everyone,

I've got a PIX 506 that seems to be having trouble allowing SSL email (ports
995 and 465) through. It DOES send eventually, but I had to crank the
timeouts up to 3 minutes in Outlook.

Now, I thought I opened everything that I would need on the PIX, and like I
said, it IS working.....just extremely slow. Receive is immediate, Send is
delayed.

Has anyone ever seen this? The 506 is running 6.3(5). Below is the
relevant part of the config. Am I missing something? Thanks, ..
Read more...

dhcp and access-list
Hi,

I have the following line in my access-list to allow my router to get an ip
addr via dhcp.
permit udp host x.x.x.x eq bootpc any

What else is required to get dhcp working. Currently i have to pull the
deny all at the end for a few seconds to get an address assigned.

Thanks.
Read more...

Weird nat (PIX 6.3.3)
Hello, here is the scenario,

Site in Paris:

external IP of the PIX: 195.238.14.14/28
internal IP of the PIX 192.168.10.1/25

Site in Madrid:

external IP of the PIX: 212.217.67.87/29
internal IP of the PIX: 10.10.10.1/25

Ok, the subnet in Paris has to show up in Madrid as 192.168.10.2, this
ip begets the source ip of any packets going through a VPN to reach any
devices in Madrid.

How do I do it?

I understand I need,

Same phase 1 and phase 2 on both sites,

on Paris, I need a nat0 access ..
Read more...

Wireless access opinions
Gang, I'm looking for sucess stories on wireless networks. We just
implemented wireless at our hospital and are just doing wep.

We have physicians coming in from time to time from other hospitals
that aren't on our network. They want to use their laptops on our
networks.

I'm just not sure if I should be looking at leap, or some other means
of authenticating them.

Any advice, books etc, would be great.
Read more...

Connecting two Cisco PIX 515 as per following Picture
Hi,

I would like to be able to setup a network as per this picture.

(1) Is it possible ?
(2) How do I setup config for pc's in inside of FW1 to inside of FW2
etc ?

http://i38.photobucket.com/albums/e134/djjase/firewall.jpg
Read more...

NAT Question
I hope I ask this correctly as I am covering for our network engineer.
We have an ipsec vpn tunnel to a partner site between 2 cisco 515e pix
firewalls. Our partner site stated that we NAT our internal addresses
to their internal address scheme so we have a server that has a static
entry (static (inside,internet) 10.103.5.1 10.0.33.70 netmask
255.255.255.255). So this server does not get a global address from the
pool as all the others do. This seems to mean that the server
(10.0.33.70) can trav ..
Read more...

PIX DCHPD handing out multiple IPs to single MAC
Hello,

We are having problems with DHCPD handing out addresses to WYSE 1200
Citrix terminals. A 501 and 506 firewall will occasionally hand out
multiple IPs to a single mac address. When I do a 'show dhcpd binding'
you can see the same mac address attached to multiple IP addresses. We
are using 6.3.4 IOS. Any ideas?

Gord
Read more...

Norfa configuration, customized CRM interface!
Hi,

Do you want your services to have own unique face? It's easy now.
We offer CRM interface customization for VM system.
Norfa services configuration: the list of our successful projects and
happy providers is growing day by day. Why aren't you one of them
yet? Allow your customers to enjoy value added services so that they
stick to you forever.
You can afford it now!

Kindly send your questions and requests by email:
Voip.conductor@gmail.com

Christopher
Read more...

Newbie question, routing between two 3620's
We have two 3620s, each with 2 WIC (2 slots, and 2 10BASET jacks) each
WIC has a pair of single T1 cards. So we have 4 T1 WAN connections, and
4 10BaseT connections.

We have a pair of T1 lines between the office, and the NOC, which we
want to stretch our office lan across, so that everyone in the office
can have internet access, and the dev machines in the office can also
directly access the backend machines in the noc, but the office machines
can only access internet.

I currently have the d ..
Read more...

Cisco 4500m
Is there a way to log internet traffic from the inside interface to an
internal server ? If so, can you explain how it is done. Thanks
Read more...

PAP2 unlock
I was wondering if anyone knew how to unlock the linksys PAP2 phone
adaptor

Mine is locked onto Vonage.

The firmware is 3.1.9 SLC

Please advise.
Read more...

66 block - What did I do wrong?
I have a 50-pair, split M 66-clip connecting block, which I want to use
to distribute 3 lines 9+ jacks. I did my research, wired it all up,
then tried to connect it, and the lines don't go through. Here's the
details:

If I can get one line working, I'm confident I'll get them all working,
so I'll just give the info for the first pair.

Line 1 comes in from the demarcation point at a modular jack next to
the block. I've tested this jack, and it's ok. I used a 2-wire
(red/green) phon ..
Read more...

DSL router cabling question
Dear all:

I did a google group search before I post this thread but please bear
with me if this had been posted and answered before. I recently wired
our house with regular "Category 5e" cable to connect two rooms so that
two computers (in different rooms) could share the DSL Internet
connection. Here are my questions:

1. I assume that most patch cable that you could buy from Radio Shack
should be "straight-through" type of cable, am I correct?? In this case
to connect th ..
Read more...

rtp implementation issues ?
Hi,

I am trying to implement a light weight RTP Stack on my
own. However, it didnt work. So, i thought of studing a few
exsisting rtp implementations.

After observing the workings in my code for say 100000 pkts many
times
over and over.
I could conclude,
1) process scheduling
2) Precision of select call (suppose i call select
with 4ms delay)
some times it would return by say 6ms or say after
60ms.

..
Read more...

Data Communications Cabling FAQ
Archive-name: LANs/cabling-faq
Posting-Frequency: monthly
Last-modified: 1995/03/05


C A B L I N G F A Q

Version 950305

This is a Frequently Asked Questions (FAQ) document for the
comp.dcom.cabling newsgroup. Topics covered include the
types of cables (fiber, coax, copper, unshielded twisted
pair-UTP, shielded twisted pair), installation techniques,
standards as well as fire and building safety codes.

Prepared and maintained ..
Read more...

New office network
While I'm relatively comfortable in designing a LAN with CAT6, I'm
trying to get a place to start evaluating using fiber to create the LAN
for a our new building and try to build in some excess capacity for the
next decade. Other than phone issues which I have at least an inkling
of some of the copper to fiber problems, what other areas should I
watch out for? NIC's would be a problem. Switches are a problem. The
major advantage I have is size; this is a 8,000 ft building in which we
wil ..
Read more...

Terminators? Why aren't they required as they are with a coaxial system?
If I were to connect computers together using coaxial cable and BNC
connectors, I would have to ensure a terminator is fixed at either end
to prevent reflections up and down the line. Why are the not needed
using twisted pair into RJ45?
Read more...

simple rtp implementations
Hi,
i am reading about rtp. most rtp sources are not straight foward to
understand and
hence novices like me find it difficult to understand.


Is there not a simple rtp program (server) sources in C which can be
understood easily.

this will help to demonstate how rtp works in practice.

moreover this will clear concepts too.



thanks and regards,
John
Read more...

Call Manager 5.0 to get SIP
Hi all,
The next release of Call Manager is expected will have SIP client
support... (see:
andquot;Cisco Adds SIP to Call Manager, Finallyandquot; and andquot;Images from Call Manager
5.0andquot; on
http://www.itarchitect.com/channels/convergence.jhtml;jsessionid=QFO0T1JA415F0QSNDBECKICCJUMEKJVN)
.
Anybody here have more detail?
Dave
Read more...

Wiring new house
I have a question... I am helping a friend wire there house and everything
is going to be home run to a central spot. I know data and that you can
terminate to a patch panel and patch to a switch or whatever. I'm just a
little uncertain with the phone. They are going to have several phone jacks
in the house. I was thinking a structured media center but soem of the
modules are pricey. So I was looking at other ways to make everything work.

Lets way they have 12 phone jacks in the ho ..
Read more...

Is there much difference between telephone adapters?
I'm having occasional speech quality problems with SunRocket.

1. When I speak, the person I called will sometimes say I sound like I'm
stuttering.

2. Sometimes when the person I call says her first andquot;helloandquot;, I don't hear
it. So I say andquot;helloandquot; and when she replies andquot;helloandquot; a second time, I hear
it okay. Generally, the rest of her conversation is okay.

3. I was talking to someone and after I finished speaking, they was no
response. It was just like the line was ..
Read more...

Voice and Data Products for your customers
Happy Holidays Everyone!
If you have customers that are looking to add and/or replace voice/data
services, and/or obtain higher efficiencies in their telecom bundle -
we can help. Touchtone Technologies, Inc (TTI) is a NY-based
telecommunications marketing-consulting company with offices in NY, NJ
and Mexico. TTI is focusing on providing increased efficiencies for all
telecommunications needs.
We are also specializing in wholesale voice and data products and
services, operator services, cause ..
Read more...

Cabling Forums
It's been awhile since I've visited this boards. Used to hang around
when Lizzard was around, etc.

Are there any *cabling* web based forums out there or is this
newsgroup the de-facto standard ;-)
Read more...

fax relay over IP - G.711, T.38
Hello group!

I wish to exchange experiences with someone who managed to successfully and
reliably set up the fax relay over the IP - either running G.711 or T.38 on
the IP side. Of special interest for me are the configurable parameters
which influences the reliability of the transmission - both parameters on
the gateways and on the faxes.

Network topology is as follows:

analog fax A - access GW - IP network - trunking GW - TDM network - trunking
GW - IP network - access GW - analog fax ..
Read more...

move the DVC box behind the router
I have my VOIP (Innomedia DVC with Phonom) working great in the
andquot;supportedandquot; configuration: DSL modem, then DVC (configured with static
IP), then wireless router (configured as a DHCP client). Internet and
phone work great. However, I recently tried using VPN and the VPN
isn't connecting.

I suspected the DVC was causing the VPN problem so I tried taking out
the DVC. To get my Internet connection to work after taking out the
DVC I had to change the router configuration from DHCP cli ..
Read more...

Data Communications Cabling FAQ
Archive-name: LANs/cabling-faq
Posting-Frequency: monthly
Last-modified: 1995/03/05


C A B L I N G F A Q

Version 950305

This is a Frequently Asked Questions (FAQ) document for the
comp.dcom.cabling newsgroup. Topics covered include the
types of cables (fiber, coax, copper, unshielded twisted
pair-UTP, shielded twisted pair), installation techniques,
standards as well as fire and building safety codes.

Prepared and maintained ..
Read more...

CAT5E and Romex (Electrical)
Just have a question,

My understanding is that you want to keep low voltage wiring about a foot or
so away from electrical when running it parallel. When crossing go at a 90
degree angel. Is that a true statement as far as CAT5 is concerned? We are
using quad sheilded coax.
Read more...

DSL VoIP Advise - Southwestern Ontario Users
Good day... I'm looking for current DSL VoIP customers who are located
in southwestern Ontario to share their experiences relative to:

1. Are you totally satisfied with voice quality (clarity, delay, etc.)?
2. Who are your DSL/VoIP service providers and what is your system
uptime (i.e. andgt;99percent)?
3. How would you rate your providers techhnical support?

Thanks in advance before we take the plunge!!!
Read more...

Multiple T1 Extension
Greetings,

I've spent a lot of time today looking into the proper way to extend a
T1 circuit past the smartjack left by the telco but am left with a few
questions. Before that, here's my situation:

There are 4 new T1 lines on smartjacks in the building telco closet.
The routers that need to be plugged into the smartjacks are roughly 70
ft. away in a different area. Currently there are several cat5e runs
between the two locations carrying ethernet and voice lines. These are
currently somewh ..
Read more...

Voip to PSTN
Hi, I am newbie in VOIP. Just want to do something very simple. I am in
Melbourne, and we have a branch office in Sydney, with private VPN
connection. I want to put a VOIP to PSTN gateway there. So that I can
run VOIP client program on my PC, connect to the gateway, and make
calls to Sydney through PSTN. By do this, I only pay local calls.

There is no need to connect all the user in Sydney office, as we all
use skype.

Not sure what software, hardware can do that.

Thank you.
Read more...

RCDD, PM job opportunity - Orlando
Hi All,

Hope I'm in the right place. I'm looking for a Project Manager/Design
Engineer with current RCDD certification for an opportunity in the
Orlando area. Manager is able to interview with candidates this week
(Tues & Weds) at the BiCSi conference - so if you aren't local to the
area, that's ok. Looking for 3-7 years of experience with requirements
gathering, estimation, proposals, etc.

If you are interested, or would like more info, please get in touch
with me ASAP to discuss ..
Read more...

Fluke Intellitone 200 - Anyone Used This?
Hi,

I am trying to decide between:

1) Fluke Intellitone 200 digital Tone and Probe kit
or 2) Tempo (Progressive Electronics) 200 FP filter probe with 77HP/6A tone
generator plus AT8L LAN toner.

The nice thing about the Fluke is that it does both analog telephone and
digital LAN with one toner.

Both are about the same price. Fluke claims improved performance with its
digital technology. However, I've seen a couple customer opinions on the
Fluke Intellitone, and they were mixed. Some sa ..
Read more...

+++The best Billing (MVTS, Cisco, Quintum) +++
Dear Sirs,

We install and support perfect billing solution for MVTS (interoperable
with Cisco, Quintum as well).
Here are some of the features:
- number of gateways not limited;
-invoices can be customised;
- web-based interface is multilingual;
-prepaidandamp;postpaid service;
- Least Cost Routing option while working with MVTS;
-any number of rating plans available;
-bills for IP-based voice traffic, fax, IP PBX, video conferencing.

That is really reliable, feature-riched solution which brings ..
Read more...

Talk about VOIP
Hi,

Talk about freely available Opensource technologies for VOIP like
Asterix in the blogger:

http://voip-opensource.blogspot.com/

Many Thanks,
Vijay Meher
Read more...

Fiber Optic & Copper services
Lightpipe Communications
Lic# 864913
www.lightpipefiber.com
925.525.5036

Lightpipe Communications offers Outside Plant / Inside Plant Fiber
Optic
& Twisted pair services.

>From a Campus LAN to a Telecommunications Fiber Backbone...

Residential & Commercial
Fiber Optic & Cat 5/6

Voice & Data
Cabling
Splicing
Testing
Termination
Emergency Restoration

Lightpipe is your connection to quality network construction and
maintenance.

Located in Northern California
Read more...

AC-211-SR unlock
I was wondering if anyone knew how to unlock the sunrocket phone
adaptor.

I use their service and now they don't want it to be returned, is there
anyway to use it??
Read more...

Opportunity in Seattle: Infrastructure & Communications All-Star
Are you:
Grounded?
Amped?
Well connected?
Looking to work for a small company that knows how to use your
well-earned skills & talents?

This firm truly helps move their clients businesses forward, and they
are seeking experienced Infrastructure Engineers who are looking to
move into a more independent role that takes full advantage of their
common sense.

Key Responsibilities:
=B7 Manage all aspects of the client project/relationship including
technology consulting, project management from ..
Read more...

How 2 increase priority of VoIP software in WinXpPro??
Hi All,

How can I increase then priority that is given by the system to a VoIP
application?

I've gone into the Win Task Manager, selected Processes, chosen the
application file, right mouse clicked over that to open the context
menu, chosen Set priority, and chosen Above normal, high, etc.

However, if I go there again later, with or without restarting the OS,
the priority level is still set as Normal ...

Any sugestions, please?

Regards,
JBR
Read more...

Just starting a new blog about cabling, telecommunications and security cameras and alarms